GunGeek's Play time with micro controllers such as arduino hacking, smart home and more.
by GunGeek on Dec 11, 2016
I had a shelf that was pretty bland. Couple that with the fact that I had a SmartThings Arduino Shield and wanted to make something I could control from every where and you get this project. Continue reading →
by GunGeek on Nov 1, 2014
So in my last post I mentioned that we were going to continue with trying to figure out our small issues of the chair controller dumping and continue to attempt to use the joystick as an interrupt in order to allow the joystick to be used. Continue reading →
by GunGeek on Oct 27, 2014
After reading my last post I realized that I forgot to put specs on the RC circuit (not radio control). The resistors are 1/2 watt 4.7k ohm resistors and the capacitors are 50v 1uf capacitors. Just in case you missed it the RC circuit is required for the arduino to talk or control the chair with out the chair controller dumping. Continue reading →
Recently I got into microcontrollers and to make a really long story short I decided to attempt to control a wheel chair with a microcontroller.
After reading my last post I realized that I forgot to put specs on the RC circuit (not radio control). The resistors are 1/2 watt 4.7k ohm...
This is a real quick tutorial on how to use HDMI to record your PS3 game play using the HD PVR 2 Gaming edition. I don't know why but it always...
I made this a while ago and did a video series on making a welding table. I figured I should put it here on my website.
Recently I acquired a New Holland 1012 Bale Wagon from a friend.
A while back I bought a 1968 John Deere 3020 tractor. After having some issues with the starting and charging system I decided to switch it over to...