So recently I moved to the boonies and don't have the greatest internet connection. I still am grandfathered in to VZW ulimited data so today I decide I am going to go ahead and connect to the phone in order to update then download the new BO2 maps. And that is where I went wrong.
The PS3 update went pretty quick, that should have also been an indication of something going wrong. I then updated black ops II and went to down load my maps and BAM. It had an error and would not read the disc. Great, so I eject the disc, put it back in... nothing no disc icon. So I eject and try another disc... SOB its broken. Ok lets try a DVD, nope nada no more ready of the shiny circle dohickeys.
So I began to search and found a 37 page thread from playstation stating that there was a problem after updating to 4.46. Scrolling through a few pages I found the link to the official PlayStation knowledge base stating how to fix the issue. Maybe I am just a conspiracy theorist but this system has been out long enough to avoid bricks. I have the original PS3 FAT with an updated larger hard drive and I have never had a brick. Do you guys think that maybe PS is trying to make PS3 act odd so people will buy PS4?
Here is the info from PS3
If you updated your PlayStation 3 Software to version 4.45 and the XMB™ (XrossMediaBar) menu is not displayed, please follow the steps below to manually update your PS3's Software and restore your system's functionality.
Step 1: Manually Download System Software
- You will need a USB Mass Storage device such as a USB flash drive with at least 168 MB of free space. If your PS3 is either CECHA00/CECHB00 series model, you can also use Memory Stick™, SD Memory Card, and CompactFlash®.
- Create a folder named “PS3” on the storage media or USB device.
- Within the PS3 folder, create a folder named "UPDATE".
- Using your computer, click the following hyperlink to begin downloading system software 4.46
- Download the update data from the webpage and save it in the "UPDATE" folder.
- Location: Save in the “PS3” folder > “UPDATE” folder
- File name: Save as file name “PS3UPDAT.PUP”
Note: If the data is not saved in the correct way, the PS3 will not recognize the update data. The folder name must be in all uppercase letters.
Step 2: Activate Safe Mode
- With the PS3 off (power light should be red), touch and hold the Power button, you will hear the 1st beep indicating that the PS3 is powering on.
- Continue to hold the power button, and after approximately 5 seconds you will hear a 2nd beep.
- Continue to hold the power button and after 5 more seconds you'll hear a 3rd beep, and system will power off (Power light goes red).
- Release power button.
- Touch and hold the Power button, you will hear the 1st beep, again for PS3 power on.
- Continue to hold and after approximately 5 seconds you will hear the 2nd beep for video reset.
- Continue to hold and after 5 seconds you will hear a quick double beep. At that point release power button.
- If you succeeded in activating Safe Mode, you will see a message on screen saying, "Connect the controller using a USB cable and then press the PS button".
- Connect a controller to the PS3 with a USB cable.
Step 3: Manually Update PS3 Software
- Connect the storage media to PS3 system.
- Select [6 - System Update] and Press X.
- Please note: Data and settings may be deleted if you choose any of the first (5) options. Please make sure to only choose option [6 - System Update].
- Press Start and Select at the same time.
- The PS3 system will restart and recognizes the update file in the storage media.
- Press right on the d-pad to scroll through the update description and user agreement.
- Press X to confirm the update.
- The system will now install the new system software and restart automatically upon completion.
I started a new website for MPN patients family and friends.
#BCAM This is the recollection of my first day with an MPN
As some may know I operate and maintain the equipment for our family operated Hay farm. Recently we aquired a Steffen 1550 Accumulator and Steffen 6515 Hay Grapple in order to help automate our hay...
The price finally came down enough in order for me to splurge and get the solo drone from 3DR. I ended up getting it on Amazon sold by Ritz Camera.
Recently I got into microcontrollers and to make a really long story short I decided to attempt to control a wheel chair with a microcontroller.
After reading my last post I realized that I forgot to put specs on the RC circuit (not radio control). The resistors are 1/2 watt 4.7k ohm...
I made this a while ago and did a video series on making a welding table. I figured I should put it here on my website.
This is a real quick tutorial on how to use HDMI to record your PS3 game play using the HD PVR 2 Gaming edition. I don't know why but it always...
Recently I acquired a New Holland 1012 Bale Wagon from a friend.
A while back I bought a 1968 John Deere 3020 tractor. After having some issues with the starting and charging system I decided to switch it over to...